Deck Ledger Board Attachment to the House

Is your deck boring and improperly constructed? One of the most important home inspections is the deck because there are number of accidents seems occur in this place. Most of […]


Is your deck boring and improperly constructed? One of the most important home inspections is the deck because there are number of accidents seems occur in this place.

Most of the time you hear or read news about deck falling and people get hurt seriously. Now, to avoid deck fails you need to attach deck ledger board. Deck ledger board holds the entire secret to a successful deck construction.

This piece of wood is so essential that connects the deck and home and other measurement taken.  A DIY deck ledger board is more accessible than ever. Still, you can find it an intimidating project, especially for those not good with hammers. So, how will you know whether you can handle the project or not? Then, all you have to do is lay out your deck plans on a paper. Complete the materials and follow the step-by-step instructions.

Here’s a guide to help you.

Step 1.
Position the ledger board and use a 4’ level to make sure you apply it perfectly straight. Mark the position of the top of the deck on the existing siding. Using the pencil marks both sides as your guide. Then, install your fasteners through the ledger board, through the house rim board and directly into the ends of the floor trusses or wall studs. Make sure you install two fasteners on center alternating top and bottom ate a measurement of 16”.
Step 2.
Attach the ledger board in place; bend the flashing over the top and around the corners to provide drainage for water away from the house. Seal all opening by using silicon to avoid water surge. Remember do not use nail or screw the decking through the top of the ledger board and through the flashing. By securing a screw this can allow water to easily penetrate the flashing and pour into the house.
Alternatively, a freestanding deck can still be placed adjacent to your home but with self-supporting and you need to attach extra footings on it. Also, it is important that you pay attention to every detail when installing the ledger board in the deck. Determine the number of footings based on your deck design.
Overall, ensure that you follow all the instruction in your plan for your deck ledger board construction. Proper planning involves responsibility. It is important that you complete plans and instruction to help you complete your DIY project. Imagine the years of enjoyment and pride you’ll enjoy when you have ledger board in your deck. You are saved from deck falling accident.
Once your DIY deck ledger board is done, you will get a sense of accomplishment and not to mention all the compliments you can get too. Start your own deck ledger board from basic, simple yet long lasting. You’ll have few choices, depending on your needs and plan.
Also, you can check the website for more design and styles. With all of these options, your DIY project will come together beautifully.

About njjacob